M2A2446-85UC
M2A2446-85UC is one of the M2A-U series USB3.0 industrial area scan cameras independently developed and designed by ZDS. Its feature is Small size, 46g ultra-light weight, Industry General Fixi, Support USB3.0, Maximum speed up to 440MByte/s, Built-in large-capacity. Frame buffer built-in, Real time transmission is stable and reliable. Strong stability Ultra low power consumption, Typical power consumption is less than 2.4W. Support third-party vision development software, developed based on USB3.0 and GenICam, compatible with HALCON, LabView, etc. Camera Hardware Graphics Accelerator, Image preprocessing.
Parameter | Value |
---|---|
Performance Parameters | |
Sensor Type | CMOS Global Shutter |
Resolution | 2448×2048 |
Optical Size | 2/3", 11.3mm diagonal |
Pixel Size | 3.4um×3.4um |
Mono/Color | Color |
Max Frame Rate | 85FPS@2448×2048 |
Dynamic Range | 67.6dB |
Gain | 1x~16x (step: 0.125x) |
SNR | 39.3dB |
Exposure Time | 1us-10s,step:1us |
Exposure mode | Support Auto Exposure/Manual Exposure/Single Exposure |
Pixel Formats | Mono8 /Mono12 /BAYER8 /BAYER12 |
Pixel Merge | Not Supported |
Trigger Mode | Hardware Trigger, Software Trigger |
Image Cache | 1Gbit |
ISP | Contrast, LUT, Gamma, Noise Reduction, Horizontal and Vertical Mirroring support |
Electrical Characteristics | |
Data Interface | USB3.0 interface, Micro USB3.0 connector with fixing screw holes |
I/O Interface | 1 optocoupler input, 2 optocoupler outputs |
Power supply | USB5V power supply |
Typical Power Consumption | 2.35W@USB5V |
Structure and environmental parameters | |
Lens Interface | C-Mount, optical back focus 17.5mm |
IO and Power Interface | 6 pole industrial circular connector |
Filter | Full Band Transparency Enhancer |
Dimension | 29mmx29mmx29mm (lens connector not included) |
Weight | Approx. 46g |
IP Protection Rating | IP40 (with lens and cables properly installed) |
Operating Temperature | -10℃~ 50℃ |
Storage Temperature | -20℃~ 70 |
Humidity | 5% ~ 90%RH (non-condensing) |
Software and Protocols | |
Software | SDK development kit, and associated demo/calibration software |
Operating Systems | Windows7/10 32/64bit;PC Linux 32/64bit |
Protocols/Standards | USB3.0 Vision,GenICam |
Compatible Software | NI MAX,Halcon,VisionPro,MV Viewer,MVS |
Certifications | CE,RoHS |
Key Features
- 5MP, color
- Small size, 46g ultra-light weight, industry-universal fixing holes
- Compliant with USB3.0 SuperSpeed communication protocol, maximum speed up to 440MByte/s
- Built-in large-capacity frame buffer, real-time transmission is stable and reliable
- Super low power consumption and high stability
- Support USB3.0Vision, GenICam Protocol
- Compatible with LabView, Halcon, MV Viewer, MVS, etc.
- Camera hardware graphics accelerator to achieve image pre-processing
- External dimensions: 29mm×29mm×29mm
Spectral response

Dimension (unit: mm)

Interface Definition
Pin | Color | Definition | Signal Source | Description | Isolated/non-isolated | Interface Circuit | Input/Output Parameters |
---|---|---|---|---|---|---|---|
1 | Red | GPO+ | Line 3+ | General purpose output Positive | Isolated output | Optocoupler | Optocoupler current limit: 20mA with polarity |
2 | Green | TRIG+ | Line 1+ | TRIG input positive | Isolated input | Optocoupler | Low effective: 0-1V, High effective: 5-24V |
3 | White | TRIG- | Line 1- | TRIG input negative | Isolated input | Optocoupler | |
4 | Yellow | Flash_out+ | Line 2+ | Flash output positive | Isolated output | Optocoupler | Optocoupler current limit: 20mA with polarity |
5 | Brown | Flash_out- | Line 2- | Flash output negative | Isolated output | Optocoupler | |
6 | Black | GPO- | Line 3- | General purpose output negative | Isolated output | Optocoupler | |
Transparent | shielding cable | Connecting the camera housing | Remarks: Transparent heat-shrinkable tubing for shielded wire cover | ||||
Pin | Color | Definition | Signal Source | Description | Isolated/non-isolated | Interface Circuit | Input/Output Parameters |